T-Bars - Aluminium Framing

Home > Products > Aluminium Framing > T-Bars

T-Bars
Make custom-sized T-slot fasteners and connectors for your application; Provided as raw steel bar stock which may be cut to length, drilled and tapped up to 8mm.

Features:

Slide into ends of T-slot
Make custom-sized T-slot fasteners and connectors for your application
Provided as raw steel bar stock which may be cut to length, drilled and tapped up to 8mm (5/16”)
Center groove serves as drilling guide
Large contact area with profile T-slot provides maximum strength

Materials:

12L 14 cold-drawn steel

Description	Part Number
6mm T-bar, 1000mm long	3 842 523 438
8mm T-bar, 1000mm long	3 842 510 078
10mm T-bar, 1000mm long	3 842 528 744
10mm T-bar, 3000mm long	3 842 529 409

Swivel-in T-Bars
T-Block should be pre-staffed into profile's groove duct before installation, and it is applied for kinds of accessories connection on profile. Spring can be used to hold T-Block in place while making vertical connections.

Features:

Can be inserted anywhere along
the profile’s T-slot, even after the
structure has been built
Make custom-sized T-slot fasteners and connectors for your application
Provided as raw steel bar stock which may be cut to length, drilled and tapped up to 8mm (5/16”)
Center groove serves as drilling guide
Large contact area with profile T-slot provides maximum strength

Materials:

12L 14 cold-drawn steel

Description	Part Number
8mm swivel-in T-bar, 1000mm long	3 842 529 327
10mm swivel-in T-bar, 1000mm long	3 842 529 325